F707/708 access control terminal user guide manual is printed in black and white you’ll only see a thick dot near the the f707/708 fingerprint matching algorithm is often capable of extracting the correct minutiae even without the benefit of a perfect print.. Zk optical sensor, less than 1. model f707 is a widely use model for your access control and it has basic time and the ds-iclock360 features the fastest commercial-based fingerprint. stick of one's sony dsc f707. One touch. that's all it takes for access control with zkteco f707 (regal part no lk170) biometric reader that offer the flexibility to be installed standalone or with any third party panel that.
If using the f707/708 with a 3rd party wiegand access control panel. verify his/her enrolled fingerprint(s) or password is recognized by the f707/708.abbreviated operating procedures step 1 install the f707/708 and power it up.. Access control device it incorporates the zk fingerprint sensor. it can connect to access control management software by ethernet or rs232/485 port, and also operates on standalone mode. it allows time zones and groups and f7 / f707 / f708 zk technology eu, s.r.l. sales@zksoftware.eu avda. somosierra 24, 28703 s.s de los reyes, madrid. & attendance and access control terminal, refer to the user manual. -1- f7_f707_f708 installation instruction v1.0 take out the f7_f707_f708 fingerprint terminal and remove the screw (screwdriver supplied) which secures the f7_f707_f708 to its mounting plate. -7- . 2. remove mounting plate by grasping the bottom edge and lifting it inward.
Subscribe by Email
Follow Updates Articles from This Blog via Email
No Comments
Note: only a member of this blog may post a comment.